DJI RS 2 Combo
If you’re planning to use the Blackmagic Pocket Cinema Camera 6K, choosing a gimbal that’s compatible with it is important. It is important to adjust your camera setup so you can move freely to achieve the best possible results when recording and producing video.
By now, you’ve probably seen that there are many affordable gimbals out there. And they all claim to be the best gimbal for the BMPCC 6k.
If you own the Blackmagic Pocket cinema camera, you might know how hard it can be to get steady footage, especially if you are using a small gimbal or tripod for support.
This article will clear the fog and help you make the right decision by choosing the right gimbal for your needs and budget.
How to Choose the Best Gimbal for BMPCC 6K?
The best gimbal for BMPCC 6K is a must-have for anyone who’s serious about filmmaking. It will give you smooth footage and camera stabilization, which is essential for shooting high-quality cinematic videos. Many gimbals are available in the market, but not all are suitable for your requirements.
Before you choose the best gimbal, there are some points that you should consider.
1. Weight Capacity
The BMPCC 6K weighs about 15 pounds all by itself, so it’s important that your gimbal can handle that weight as well as any additional gear (like lenses). If you’re planning on adding an external monitor or mic, ensure your gimbal has enough capacity to handle them.
2. Battery life
You also need to consider how long the battery will last on your gimbal. This will vary from model to model, but some can last up to 8 hours while others only have enough juice for an hour or two.
You also want to ensure the battery can be replaced easily if needed so that there are no interruptions between takes.
The design of the gimbal is very important as it determines how well it will fit your camera. Also, it determines how stable your shots will be. A poorly designed gimbal could cause unwanted movements and vibrations, resulting in blurry footage.
A stable gimbal is essential to capture smooth shots and avoid unwanted vibrations caused by wind or footsteps. These vibrations will also cause your footage to become shaky and blurry, ruining your shot completely!
The best gimbals for the BMPCC 6K have rubberized grips on them so that holding onto the camera feels comfortable and secure in your hands. This also helps prevent any unnecessary shakes or vibrations from occurring during filming.
The size of your camera will dictate how large of a gimbal you need. If you have an older model (like the 5D Mark II), you’ll need a smaller gimbal than a newer model like the 6K (or even the RED Scarlet).
7. Payload Capacity
The BMPCC 6K is a small and lightweight camera. So, choosing a gimbal that can handle the camera’s weight is important.
The payload capacity refers to how much weight the gimbal can support without breaking down or becoming unstable.
Related: Best Gimbal for BMPCC 4k
Top 5 Gimbals for BMPCC 6K
The BMPCC 6K is a great camera for vlogging and video production. However, if you’re looking to capture high-quality footage, it’s important that you have a gimbal that can support your camera and keep it steady during use.
Here are the top 5 gimbals for the BMPCC 6K:
1. DJI Ronin-S | Best for Professionals
Best Gimbal for Professionals | DJI Ronin-S
The DJI Ronin-S is a professional handheld gimbal designed for use with BMPCC and GoPro HERO7, HERO6, HERO5, and other similar cameras. With the Ronin-S, you can capture smooth, stabilized video from nearly any angle while keeping your hands free to operate other equipment.
- Excellent rubber finish
- Extended battery life
- Smooth panning and tilting
- Easy to setup Ideal for BMPCC 6K
- Needs time to learn
- A bit heavy
The modular design of this gimbal makes it easy to use, carry, and store. Plus, you’ll get versatility and flexibility like none other. The controls on this device are easy to access and understand. With just one hand, you can record fast-moving objects and switch between user profiles.
The Ronin-S uses three motors to keep your camera level and can be mounted on the included shoulder pad or other compatible accessories.
You can use the included remote control or DJI Assistant 2 software to adjust the camera angle, panning and rolling speed, start/stop recording, and more.
The Ronin-S includes an integrated battery that provides up to 4 hours of power on a single charge, or you can use an external power source via a USB port. Two sets of hand grips are included so you can quickly switch between vertical and horizontal configurations.
7.28 x 7.95 x 19.13 inches
Strong and sturdy construction
The DJI Ronin-S is made of high-quality, lightweight aluminum alloy and carbon fiber materials.
It comes with an anti-vibration damping system that keeps the camera steady even when there are strong vibrations or wind. The chassis is built using metal to make it very durable.
The DJI Ronin-S uses brushless motors in its body to provide smooth movement for your camera. These motors are also highly efficient because they consume less power than their brushed counterparts.
The gimbal can move in all three axes, which allows you to create complex shots with ease.
Setting up the DJI Ronin-S takes just minutes! You just need to attach your camera onto the gimbal and turn on your transmitter to start shooting smoothly!
2. ZHIYUN WEEBILL-S | Overall Best
Overall Best Gimbal | ZHIYUN WEEBILL-S
ZHIYUN WEEBILL-S is a high-quality gimbal for the Panasonic Lumix GH5, GH5s, and BMPCC 6K. It’s made of high-strength aluminum alloy and stainless steel, and it has multiple I/O options.
- Very comfortable
- Internal software works perfectly
- Easy to transport
- Excellent design
- Tends to drift from time to time.
The Zhiyun Weebill-S is a stabilizer that helps you get smooth, shake-free shots. It’s easy to use and fits the BMPCC 6K perfectly. This gimbal uses 4K sensors and built-in inertial measurement units (IMUs) to stabilize motion.
The Weebill-S features an advanced algorithm that detects the camera’s movements and compensates for unwanted vibrations. This gives you smooth pans and tilts with virtually no drifting effect or jittering.
The Weebill S also features continuous servo correction technology that lets you make smooth adjustments to your focus while recording video. This makes it more convenient than using manual focus while shooting video since you don’t have to keep adjusting the focus manually while filming.
The Weebill-S is made of high-quality materials designed to last through years of use without any issues whatsoever.
40 x 36.5 x 14 centimeters
Lightweight and portable handheld gimbal for BMPCC 6K with a compact design that makes it easy to carry with your camera setup wherever you go.
Three different modes
User-friendly software allows you to switch between three different modes: Follow mode for following a subject; Pan mode for panning shots; Lock mode for locking focus on a subject.
Simple user interface makes it easy for anyone to use the WEEBILL-S without any prior experience in video production or filmmaking.
3. DJI RS 2 Combo | Best for Professional Videographers
Best for Professional Videographers | DJI RS 2 Combo
The DJI RS 2 combo gimbal is designed for the BMPCC 6k, allowing you to capture smooth and stable footage in any situation. The gimbal’s support arm can be adjusted to accommodate any lens length and also features a quick-release plate that makes switching cameras a breeze.
- Easy to balance
- Extended battery
- Easy to use
- Takes a bit time to setup
The DJI RS 2 combo gimbal is designed to work with the BMPCC 6K camera. It can be used with both the Blackmagic Pocket Cinema Camera 6K and Blackmagic Production Camera 4K cameras. The DJI RS 2 gimbal uses a brushless motor to provide smooth, professional-quality footage.
This handheld stabilizer has been designed specifically for mirrorless cameras and has an integrated quick-release system that makes it easy to attach and detach.
The DJI RS2 gimbal features an adjustable handlebar that can be tilted 45 degrees up or down in order to give you more control over your shots. The handlebar also features a joystick knob that lets you adjust pan and tilt angles with just one hand while shooting.
25.9 x 26.4 x 7.1 centimeters
The DJI RS-2 uses three brushless motors on each arm to control pitch, roll, and yaw movements.
These motors are controlled by an algorithm determining the best way to counter unwanted movement. This makes it easy to produce smooth and stable shots.
The DJI RS-2 features an intuitive color touchscreen that lets you quickly access all camera settings and other functions without having to remove your hands from the gimbal’s handlebars.
Advanced MIMIC technology
The DJI RS-2 uses an advanced MIMIC technology that allows the gimbal to understand the movements of your hand and reproduce them with precision in real-time.
This means you can use it just like your hand would move, making it easy for anyone to operate.
4. MOZA Air 2S | Best High-Tech
Best High-Tech Gimbal | MOZA Air 2S B
The MOZA Air 2S is a high-tech gimbal that will take your videos to the next level. It’s lightweight, easy to use and produces amazing results!
- Mimic motion control
- Excellent payload
- Plenty of mounting options
- Compatible with a range of cameras
- Object tracking worked only on iPhone
The MOZA Air 2S is a professional handheld gimbal that uses brushless motors to keep the camera steady while moving around. The joystick controller has two modes — one for panning, tilting, and rolling and another for controlling focus and zoom.
The MOZA Air 2S supports up to 10 pounds of weight, so it’s suitable for DSLRs, mirrorless cameras, and action cams like GoPro. The handle provides a solid grip with a rubberized coating, while mounting points for accessories such as lights or microphones are on top of the handle.
The MOZA Air 2S offers multiple control modes that allow you to capture the perfect shot. You can use the remote control to start and stop recording on your camera or use the joystick to pan and tilt your camera remotely.
52.4 x 31.5 x 12.6 cm
Smart Micro HandWheel
MOZA Air 2S has a small handwheel, which can be easily operated by one hand. It can be used as an auxiliary control to enhance the stability of the camera and reduce the vibration.
Real-time image stabilization
Real-time image stabilization allows you to capture footage with minimal jello effect or rolling shutter. With a camera, the MOZA Air 2S can be used as a handheld gimbal for any camera up to 9 lbs (4 kg).
The foldable design allows the MOZA Air 2S to easily fit in any bag or backpack. It’s perfect for vloggers and travelers who want to capture smooth video on their travels.
5. DJI RSC 2 | Best for Professional Use
Best for Professional Use | DJI RSC 2
The DJI Ronin S is a professional camera stabilizer that can be used by both professionals and beginners. It is equipped with a 3-axis brushless motor system, which makes it easy to control the camera movements. This makes it possible to achieve smooth footage without any jerks or vibrations.
- Smooth shooting
- Supports full-frame payload
- A bit heavy
The DJI RSC 2 Gimbal is the best gimbal for professional use. The DJI RSC 2 also has a built-in controller that lets you adjust the tilt and pan of the camera precisely in flight. You can calibrate it to match your flying style so that you don’t have to learn new controls every time you fly with it.
This gimbal stabilizer can be used with different camera models such as BMPCC 6K cameras, the Sony A7 series, Canon 5D Mark III/7D/6D Mark II/1DX Mark II, Nikon D850/D750/D850/D750, Panasonic GH5/GH4, etc.
It also comes with a remote control that allows you to control the gimbal while flying your drone. This makes it easy to get smooth, stable aerial shots with ease!
33 x 27.4 x 10.2 Centimeters
The gimbal is foldable so you can store it in a small bag when not using it.
Quick release plate
The quick-release plate makes it easy to detach the gimbal from your aircraft, so you can easily take it off your drone after the flight. This makes it easier than ever before to use your drone with multiple batteries or cameras at once.
Why does BMPCC Not Fit on Every Gimbal?
The BMPCC is a unique camera. It’s small and compact, but it packs a punch. It’s ideal for shooting with gimbals, but the gimbals themselves have to be compatible with their size.
When you’re looking for a gimbal that works with the BMPCC, make sure you read the product description carefully. Some gimbals are made specifically for smaller cameras like the BMPCC, while others are made for larger ones.
There’s nothing wrong with using an incompatible gimbal if that’s what you want, but if you’re looking to use your camera on a specific gimbal, make sure it’s compatible before purchasing!
Related: The Best DSLR Gimbals
There are many reasons why a BMPCC does not fit on every gimbal. The first reason is the size of the camera. The BMPCC is a small camera, so it will not fit on all gimbals simply because of its small size.
Another reason is that the camera’s weight needs to be considered. If you have a heavy camera, then you will need to find a heavy-duty gimbal that can hold its weight. You should also consider the height of your camera when looking for a gimbal because some gimbals are too tall or too short to hold your camera properly.
The cinema-grade image quality of the BMPCC 6k makes it an ideal camera for handheld video work. And, with a gimbal attached, you can capture smooth, stable footage even while walking or running.
If you are ready to take your handheld videos to the next level, we hope this guide has given you some ideas about which gimbals are well-suited for the BMPCC 6k—and maybe even for your needs in general.
DJI RS 2 Combo